Watch Tv On A Pc Using Dazzle 90

Watch television on your computer with a Dazzle 90 video capture port.

The Dazzle 90 is a video capture device used in conjunction with video editing programs that allows you to hook up outside audio/video equipment that does not have a USB or firewire cable connection. However, it is possible to connect a cable or satellite receiver to the Dazzle 90. Doing so allows you to view actual television programming on the display screen in your video editor.

Instructions

1. Connect the Dazzle 90 to one of the USB ports on your computer. Install all drivers and software that come with the Dazzle 90.

2. Plug the RCA audio/video cables into the “Video Out” ports on the back of the cable/satellite receiver. Make sure the colors of the cables match the colors of the ports.

3. Insert the opposite ends of the cables into the “Video In” ports on the Dazzle 90.

4. Launch the video editing program you have installed on the computer (Windows Movie Maker is available on the “Start” menu). Power on the cable/satellite receiver once the program fully loads.

5. Choose “Capture” and the video capture option; then select “Dazzle 90” as the device you want to capture from. The programming from the cable/satellite receiver will appear on the screen. Adjust the television station you want to view by using the cable/satellite’s remote control.


READ  Programs For Laptop Webcams

Watch Tv On A Pc Using Dazzle 90

Watch television on your computer with a Dazzle 90 video capture port.

The Dazzle 90 is a video capture device used in conjunction with video editing programs that allows you to hook up outside audio/video equipment that does not have a USB or firewire cable connection. However, it is possible to connect a cable or satellite receiver to the Dazzle 90. Doing so allows you to view actual television programming on the display screen in your video editor.

Instructions

1. Connect the Dazzle 90 to one of the USB ports on your computer. Install all drivers and software that come with the Dazzle 90.

2. Plug the RCA audio/video cables into the “Video Out” ports on the back of the cable/satellite receiver. Make sure the colors of the cables match the colors of the ports.

3. Insert the opposite ends of the cables into the “Video In” ports on the Dazzle 90.

4. Launch the video editing program you have installed on the computer (Windows Movie Maker is available on the “Start” menu). Power on the cable/satellite receiver once the program fully loads.

5. Choose “Capture” and the video capture option; then select “Dazzle 90” as the device you want to capture from. The programming from the cable/satellite receiver will appear on the screen. Adjust the television station you want to view by using the cable/satellite’s remote control.


READ  Make Cs Movies For Free